Home of Jacklamp™ (the unique new LED package type) and Jacklamp Caddy™ (the Jacklamp™ power accessory). Jacklamps™ are available as bright white LED, red LED, UV LED in both USB and IEEE 1394a (Firewire™) types. Coming soon to a cable near you from the Ski Shore™ of Park City, Utah - A geeks flashlight! The Jacklamp™ on a JacklampCaddy™ isn't, a LED flashlight, a LED laptop light, a LED cable tester, a LED cable identifier, a LED port tester, a LED signal light, a LED security light, etc., but they can be used as one.

_™

_™

Home About Products Buy FAQ FYI Pics NUN

Billions of powered peripheral cables already plugged in, await this light.

click to enlarge image

Coming soon to a cable near you!
The one and only,
Jacklamp™

(patent pending, as seen here)

and its equally novel companion, the unique,
Jacklamp Caddy™
(patent pending, not shown)

click to enlarge image

The Jacklamp™ is a LED lamp in a jack¹ package, which you simply fit on the end of a matching² powered cable, and it emits radiation for task lighting, signaling or indication³. See these proto-movies 1st USB, 2nd USB, 1st Firewire™ and 2nd Firewire™

The only, Plug & Point or Unplug & Pocket Peripheral available today. Read more in Jacklamp™ FAQ.

Initially, Jacklamps will be made available for use with your USB, Firewire™ and Power over Ethernet (PoE) cables, in bright⁴(6-24cd) fixed or variable intensity, colors of white, IR, red, yellow, green, blue, UV-A⁵ and combinations.

Variable brightness control is manual and soon will be bus signal controlled.

Battery powered USB and Firewire™ devices are often charged while connected to your computer or with a power adapter that uses the same cable. A Jacklamp™ may be powered likewise by your computer or power adapter and also by our Jacklamp Caddy™ accessory.

The Jacklamp Caddy™ is an accessory that stores, carries and in the absence of a matching² powered cable, provides power to a Jacklamp™. The Jacklamp Caddy™ consists of a power source, a carrier plug, a jack, a case and a switch to apply power to either the jack or the plug. Read more in Jacklamp Caddy™ FAQ

A Jacklamp™ fits directly on the caddy plug for storage, transportation and use as an independent, portable, handheld task light, signal light or indicator³.

A Jacklamp™ on a cable plugged into the caddy jack provides a light weight, easy to handle, independent, portable, extended task light, signal light or indicator.

Existing USB or Firewire™ laptop LED lights may also be plugged into the caddy jack and used independently of your computer as a handheld light or stationary lamp with the caddy as a base. This limits you, however, to red or white light and only a half meter reach.

A Jacklamp Caddy™ without a cable, makes a handy emergency power source for iPods, etc.

Notes:: 1. A jack is a female connector also know as a socket or a receptacle, which can receive a plug or male connector.
2. e.g. a USB Jacklamp™ on a USB cable, a Firewire™ Jacklamp™ on Firewire™ cable, etc.
3. e.g. identify a single cable in a bundle or at a remote location, the health of a cables power circuit, etc.
4. WARNING: DO NOT LOOK WITH OPTICAL INSTRUMENTS OR DIRECTLY INTO ANY JACKLAMP™! IT IS POSSIBLE TO PERMANENTLY DAMAGE YOUR VISION!
5. UV-A is 315-400 nm, this Jacklamp™ is 395 nm, at brightnesses of .51-.55 cd.

© 2004-2007 Jacklamp, L.L.C. • All rights reserved • Patents Pending • Contact • Caution: Forward-Looking Statements • print
W. W. Truxes III • Jacklamp, L.L.C. • P. O. Box 4077 • Park City, UT 84060-4077 • ww@jacklamp.com

Need hot melt and waterbased adhesives or braille and ADA elevator signage? Visit www.truxes.com
Want to "Help Tubes Help" teach the AAPCC US nation poison control center hotline phone number, 1-800-222-1222?
Visit www.cinch1.com, where C"1 Keeps Tubes Full!